Mini UV Integrator

Features:
  It has basic UV Integrator features,but with higher precision and stronger stability.
  It is our patent product. It appear ingenious, beautiful and convenient, so it is more convenient to take.
  Adopting high precision and mini imported parts, its whole external appearance size is very small and it can be applied for many UV system such as Large production line of UV system, multidimensional UV system and precision, nice and low-power UV system.

 Technical Data:
Spectral range:   UV 250-410 nm
Measuring range: Unlimited
Display range:  0~ 999,999mJ/cm2
Power source:  AAA Battery
Power consumption:  100μA
Battery service life:  1 year
Dimensions:  93L*63W*13H (mm)
Weight: Approx：150 kg
Temperature range:  0~ 45°Celcius degree
Max Temperature: The Integrator can endure max. 110 Celcius degree for up to 10 seconds on the conveyor belt,
Precision: +3%
Calibration: In order to keep its full function and precision it is recommended to have re-calibration done once per year. Re-calibration will also be necessary after change of battery.
Warranty: 1 year from the date of purchase. But the battery, and other bad-easy parts and ruined instrument by man are not included

Application:
  It is used for measuring the energy of different light sources within a certain time, which is also as usually called the light energy.
  With the advancement of the curing requirements of customer, UV meter has more and more become the important quality monitor. It has also become the essential tool of controling and realizing curing quality consistency.
 Spectral range is UV250-410 nm and the main length is 365nm.
   Usage:
  Switch on the UV-Integrator. The display on the LCD will show “0” mj/cm2.
  Place the UV-Integrator with the front facing the conveyor belt. The sensor is on the back of
the UV-Integrator. The back plate of the UV-Integrator serves as the heat shield.
  After the UV-Integrator has passed through the conveyor, take the UV-integrator from the
conveyor belt in order to read the measuring result. The measuring results are shown as:
mJ/cm2.
  Prior to a new measuring sequence, it is necessary to switch “off” and then “on” again.
 This will reset the display to “0”.
Continue as described in Step 2.
  After using the instrument, please put it into the packing box and prevent it broken.
  You can measure it again and again if you need it .
   Attention:
  Please avoid shaking the UV-integrator or break it.
  After using it every time, please close the instrument in time and put it into the packing box.
  Do not put the LCD on the instrument out the high-light or high- energy area.
  Don’t open the instrument to calibrate or destroy it if you are not professional. Otherwise, the measuring effect and precision of the instrument will be affected.

UV Integrator>>

UV-integrator&intensity meter>>

UV Intensity meter>>